CCTV & Security (Access Control)
A range of power supplies available in Linear or Switch Mode specifically designed for the Access Control Market
Watts:
Type:
Outputs: reset filter
-
.aspx?width=101)
13.8Vdc 5Amp - T4444ST
13.8Vdc 5Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 5Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 10V +/- 5%)
• Battery reverse charge protection (Fuse)
-
24Vdc 5Amp - T4443ST
24Vdc 5Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 5Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 20V +/- 5%)
• Battery reverse charge protection (Fuse)
-
24Vdc 3Amp - T4442ST
24Vdc 3Amp battery backed up switch mode power supply
• Mains present & DC good LED (Green)
• Continuous 2Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 20V +/- 5%)
• Battery reverse charge protection (Fuse)
-
24Vdc 2Amp - T4441ST
24Vdc 2Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 2Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 20V +/- 5%)
• Battery reverse charge protection (Fuse)
-
24Vdc 1Amp - T4440ST
24Vdc 1Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 1Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 20V +/- 5%)
• Battery reverse charge protection (Fuse)
-
13.8Vdc 4Amp - T4439ST
13.8Vdc 4Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 3Amp current to load
• Additional 0.5Amp to charge standby battery
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 10V +/- 5%)
• Battery reverse charge protection (Fuse)
-
13.8Vdc 3Amp - T4405ST
13.8Vdc 3Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 3Amp current to load
• Additional 0.5Amp to charge standby battery
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 10V +/- 5%)
• Battery reverse charge protection (Fuse)
-
13.8Vdc 2Amp - T4404ST
13.8Vdc 2Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 2Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 10V +/- 5%)
• Battery reverse charge protection (Fuse)
-
T4403ST
13.8Vdc 3Amp battery backed up switch mode power supply.• Mains present & DC good LED (Green)
• Continuous 3Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 10V +/- 5%)
• Battery reverse charge protection (Fuse)FeFeatures
• Mains present & DC good LED (Green)
• Continuous 3Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 10V +/- 5%)
• Battery reverse charge protection (Fuse)
The T4403ST is a boxed, ready to use, highly efficient power supply for use in intruder, access control or general PSU applications where there is a requirement to run off an internal 12V 7Ah sealed lead acid battery (not supplied) if there is a mains failure.
-
T4402ST
13.8Vdc 2Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 2Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 10V +/- 5%)
• Battery reverse charge protection (Fuse)
-
T4394ST
13.8Vdc 1Amp battery backed up switch mode power supply.
• Mains present & DC good LED (Green)
• Continuous 1Amp current to load
• Additional 0.5Amp to charge standby battery
• Front tamper circuit
• Overload, overvoltage and over current protection on dc output
• Battery discharge protection (system shut down @ 10V +/- 5%)
• Battery reverse charge protection (Fuse)